FAQs

We enforce strict containment protocols on every site:

1. Isolation: Sealing off the work area using heavy-duty plastic barriers.
2. Negative Pressure: Running industrial HEPA negative air units to capture airborne fibers.
3. Wet Suppression: Spraying chemical bonding agents to lock down dust during dismantling.
4. Sealed Disposal: Double-wrapping all waste inside heavy-duty, labeled asbestos bags before safely transporting it to a licensed disposal facility.

An Asbestos Clearance Certificate is an official document issued by an independent competent person or licensed assessor. It verifies that the work zone has passed a strict visual inspection (and air monitoring if required) and is verified completely safe to re-occupy.

Under QLD Work Health and Safety regulations, a clearance certificate is legally mandatory for all Class A friable removals and any Class B bonded removal exceeding 10m².

If your property was built or renovated before 1990, there is a high probability it contains asbestos-containing materials (ACM).

Common locations include fibro wall sheeting, eaves, ceiling tiles, vinyl flooring underlay, and corrugated roofing. Because asbestos cannot be identified by sight alone, our certified team takes physical samples to an accredited laboratory for precise testing before any work or renovation begins.

In Queensland, homeowners are only legally permitted to remove up to 10 square metres of non-friable (bonded) asbestos without a removal licence. Anything over 10m² requires an approved certificate or a licensed Class B removalist.

Friable asbestos (crumbly materials or loose insulation) must always be removed by a Class A licensed specialist. Because improper handling risks heavy council fines, airborne fiber contamination, and voided property insurance, engaging a licensed professional is strongly advised for any removal work.

While standard residential asbestos removal in South East Queensland typically averages anywhere from $30 to $150 per square metre (or $1,500 to $10,000+ for complete property jobs), an exact figure requires a formal inspection and quote.

Because every property is different, total costs depend on several specific variables:

• Material Type: Non-friable (bonded sheets, walls, roofing) is generally less expensive to manage than friable asbestos (loose-fill, insulation), which requires strict containment and specialist equipment.
• Accessibility & Safety: Second-story roofs, tight subfloors, or awkward spaces require additional safety setups, scaffolding, or specialised access gear.
• Volume & Area: Total square meterage directly dictates labour, transport, and disposal requirements.
• Disposal & Compliance: Local council tip fees, waste tracking, site air monitoring, and independent clearance certificates factor into the total price.

In Queensland, the essential paperwork you receive after asbestos removal proves compliance with Workplace Health and Safety (WHS) regulations.

Primary Documents Received

• Clearance Certificate: The most critical document. Under Queensland WHS laws, a visual inspection must be conducted post-removal to ensure the area is safe and free of residual dust.
  • For friable asbestos (crumbly/loose), an independent Licensed Asbestos Assessor must perform the inspection and issue the certificate.
  • For non-friable asbestos (bonded sheets, vinyl, roofing over 10m²), a licensed assessor or trained competent person must inspect and provide the clearance.
• Waste Tracking / Disposal Receipt: Proof that the removed material was lawfully transported and tipped at a licensed Queensland EPA waste facility. This protects you from liability regarding illegal dumping.
• Air Monitoring Report (If applicable): Mandatory for Class A (friable) jobs or sensitive residential sites to prove airborne fibre levels stayed well below safe exposure thresholds (<0.01 fibres/mL) during and after removal.
• Updated Asbestos Register / Management Plan (Commercial properties only): If the work took place on a workplace or residential common area built before 2004, the property’s asbestos register must be updated to reflect the removal.

Not always. For small, localized, or external removal jobs (such as eaves, roofs, or detached sheds), you can often stay in your home provided you remain outside the designated exclusion zone and keep doors and windows closed.

However, for major internal removals, friable asbestos work, or jobs where living areas must be sealed off, occupants will need to vacate the property for safety while active removal is underway. Your removalist will specify requirements in the site-specific Asbestos Removal Control Plan prior to starting.

The primary difference between Class A and Class B asbestos removal lies in the type of asbestos material being handled, the risk level, and the strictness of the safety controls required by Workplace Health and Safety (WHS) regulations.

You cannot confirm asbestos just by looking at it—the microscopic fibres are embedded inside other materials. The only 100% reliable way to confirm its presence is through sample testing by a NATA-accredited laboratory.